TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 77 of 1012
TM 9-2350-261-20-2 REPLACE FAN DRIVE BELTS 0211 00 THIS WORK PACKAGE COVERS: Removal (page 0211 00-1). Installation (page 0211 00-2). Adjustment (page 0211 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s Lockwasher (4) P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Power plant rear access panel removed (WP 0431 00, WP 0432 00, or WP 0433 00) REMOVAL 1. Remove four screws (1), flat washers (2), lockwashers (3), and fan pulley access cover (4) from power plant compartment rear bulkhead. Discard lockwashers. 2. Loosen locknut (5) that secures rod end (6) to adjusting nut (7). 3. Turn adjusting nut (7) counterclockwise to loosen drive belts (8). 4. Remove drive belts (8) from idler pulleys (9) and (10) and fan pulleys (11) and (12). 0211 00-1