TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 766 of 1012
TM 9-2350-261-20-2 REPLACE SHOCK ABSORBER PIN — Continued 0380 00 INSTALLATION 1. Install pin (2) in road wheel support arm (3). Secure with new locknut (1). TIGHTEN LOCKNUT TO 210-230 LB-FT (283-310 N·M). Use torque wrench. FOLLOW-THROUGH STEPS 1. Install road wheel support arm (WP 0374 00). 2. Install road wheel (WP 0371 00). 3. Road test carrier to check that shock absorber pin is installed properly (WP 0120 00). END OF TASK 0380 00-2