TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 759 of 1012
REPLACE TRACK TENSION ADJUSTER AND MOUNT — Continued 5. Rotate mount (4). Install two screws (6). NOTE When using torque wrench with torque wrench adapter, torque value must be corrected. Procedure for converting torque value is i n WP 0120 00. 6. TIGHTEN SCREW (5) AND TWO SCREWS (6) TO 130-140 LB-FT (176-190 N·M) TORQUE. Use torque wrench and adapter. 7. Install washer (7) and screw (8) in shaft idler arm. TIGHTEN SCREW TO 130-140 LB-FT (176-190 N·M) TORQUE. Use torque wrench. 8. Install washer (9) and screw (10) on mount (4). TIGHTEN SCREW TO 130-140 LB-FT (176-190 N·M) TORQUE. Use torque wrench. FOLLOW-THROUGH STEPS 1. Connect and adjust track (see your -10). 2. Road test carrier to check that ad juster is i nstal led pr oper ly ( WP 0120 00). END OF TASK 0378 00-3/4 blank 0378 00 TM 9-2350-261-20-2