TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 758 of 1012
TM 9-2350-261-20-2 REPLACE TRACK TENSION ADJUSTER AND MOUNT — Continued 0378 00 CLEAN, INSPECT, AND REPLACE 1. Checking fittings and relief valve for wear and damage. Replace if needed. INSTALLATION 1. Install relief valve (1) and grease fitting (2) in track tension adjuster (3). NOTE Grease fitting and relief valve of track tension adjuster should be toward front of carrier. Make sure grease fitting is pointing out. 2. Place track adjuster (3) on shaft of idler arm. 3. Install mount (4) in front of adjuster (3). Raise adjuster and mount. Align hole in mount with hole in hull for screw (5). 4. Install screw (5) in mount (4). Tighten until snug. 0378 00-2