TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 751 of 1012
TM 9-2350-261-20-2 REPLACE IDLER WHEEL ARM BEARINGS AND SEALS — Continued 0376 00 10. Install new cotter pin (6) in arm (7). 11. Install new gasket (8), hub cap (9), and four screws (10) in hub (1). 12. Fill hub (1) with grease (WP 0120 00). FOLLOW-THROUGH STEPS 1. Install idler wheel (WP 0375 00). 2. Connect track and adjust tension (see your -10). 3. Road test carrier to check that idler wheel hub is installed right (WP 0120 00). END OF TASK 0376 00-5/6 blank