TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 743 of 1012
TM 9-2350-261-20-2 REPLACE ROAD WHEEL SUPPORT ARM, BEARINGS, AND SEALS — Continued 0374 00 9. Install new packing (1) on assembly (2). 10. Secure guard (3), packing (1), and assembled road wheel support arm assembly (4) to hull (number four and five positions) with four screws (5) and two screws (6). TIGHTEN SIX SCREWS TO 130-140 LB-FT (176-190 N·M) TORQUE. Use torque wrench (WP 0780 00, Item 103). 11. Secure guard (7), packing (1) and assembled road wheel support arm assembly (4) to hull (number three position) with four screws (5) and two screws (6). TIGHTEN SIX SCREWS TO 130-140 LB-FT (176-190 N·M) TORQUE. Use torque wrench (WP 0780 00, Item 103). 12. Secure assembled road wheel support arm (4) to hull (number one position) with six screws (6). TIGHTEN SIX SCREWS TO 130-140 LB-FT (176-190 N·M) TORQUE. Use torque wrench (WP 0780 00, Item 103). 13. Secure assembled road wheel support arm (4) to hull (number two, three, four, and five positions) with five screws (5). Use six screws (number one position). TIGHTEN SIX SCREWS TO 130-140 LB-FT (176-190 N·M) TORQUE. Use torque wrench (WP 0780 00, Item 103). FOLLOW-THROUGH STEPS 1. Install torsion bar (WP 0385 00). 2. If removed, install shock absorber (WP 0379 00). 3. Install road wheel hub (WP 0371 00). 4. Install road wheel (WP 0371 00) (T130) or (WP 0372 00) (T150). 5. Lube road wheel supports (WP 0120 00). 6 . Road test carrier to check that arm is in stalled p ro perly (WP 0120 00 ). END OF TASK 0374 00-5/6 blank