TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 733 of 1012
TM 9-2350-261-20-2 REPLACE ROAD WHEEL HUB 0373 00 THIS WORK PACKAGE COVERS: Removal (page 0373 00-1). Clean, Inspect, and Replace (page 0373 00-2). Installation (page 0373 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) Replacer (WP 0780 00, Item 57) Ring Spacer (WP 0780 00, Item 71) Torque Wrench (WP 0780 00, Item 103) M a t e r i a l s / P a r t s Grease (WP 0782 00, Item 24) Sealing compound (WP 0782 00, Item 61) Cotter pin Hub cap gasket Hub-to-arm seal Inner bearing (as needed) Inner bearing cup (as needed) M a t e r i a l s / P a r t s Outer bearing (as needed) Outer bearing cup (as needed) Ribbed shoulder bolt (as needed) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s TM 9-214 W P 01 20 00 E q u i p m e n t C o n d i t i o n Carrier on level surface Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) Road wheel removed (WP 0371 00) (T130) or (WP 0372 00) (T150) REMOVAL 1. Remove four screws (1), hub cap (2), and gasket (3) from road wheel hub (4). Discard gasket. 2. Remove cotter pin (5), nut (6), and washer (7) from road wheel support arm (8). Discard cotter pin. 3. Remove outer bearing (9) and hub (4) from road wheel support arm (8). Remove seal (10) and inner bearing (11) from hub (4). Discard seal. 0373 00-1