Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 730 of 1012

TM 9-2350-261-20-2 REPLACE T150 ROAD WHEEL — Continued 0372 00 INSTALLATION 1. Lift track assembly with bar. Place two road wheels (1) on road wheel arm (2). Secure loosely with eight washers (3) and new locknuts (4). 2. Unblock carrier (see your -10). WARNING If road wheel lifter slips while lowering road arm, it could injure you. Stand clear before you lower road arm. 3. Start engine (see your -10). Place range selector in RANGE 1. Slowly drive carrier forward off lifter (5). Remove lifter. WARNING Failure to lock steering levers and block the road wheels can allow the carrier to move and could result in injury or death. Always lock steering levers and block road wheels before working on the carrier. 4. Remove two T-nuts (6), screws (7), flat washers (8), and retainer (9) from lifter (5) and remove road wheel lifter assembly from track. 5. Block carrier (see your -10). 6. TIGHTEN EIGHT NUTS (4) TO 150-170 LB-FT (203-230 N·M) TORQUE. Use torque wrench. 0372 00-4