TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 728 of 1012
TM 9-2350-261-20-2 REPLACE T150 ROAD WHEEL — Continued 0372 00 2. Loosen eight locknuts (7) on road wheel (9). Do not remove nuts. WARNING Position retainer stops inside of end connectors to prevent the lifter from slipping off and causing injury and/or death to personnel. 3. Install retainer (4), two flat washers (3), screws (2) and T-nuts (1) on inside of track assembly. 4. Place lifter (5) under road wheel arm (6). Keep lower tips of lifter in track link just rearward of wheel being removed. 5. Unblock carrier (see your -10)). WARNING If road wheel lifter slips while lowering road arm, it could injure you. Stand clear before you lower road arm. 6. Start engine (see your -10). Place gear selector in R. Slowly back carrier until lifter (5) is vertical and road wheel (9) clears ground. WARNING Failure to lock steering levers and block the road wheels can allow the carrier to move and could result in injury or death. Always lock steering levers and block road wheels before working on the carrier. 7. Block carrier (see your -10). 0372 00-2