Sign up to sell your inventory with NSN Lookup

TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 725 of 1012

TM 9-2350-261-20-2 REPLACE T130 ROAD WHEEL — Continued 0371 00 INSTALLATION 1. Lift track assembly with bar. Place two road wheels (1) on road wheel arm (2). Secure loosely with eight washers (3) and new locknuts (4). 2. Remove blocks used to keep carrier from moving (see your -10). WARNING You can be hurt if road wheel lifter slips while road arm is being lowered. Stand clear. 3. Start engine (see your -10). Place range selector in RANGE 1. Slowly drive carrier forward off lifter (5). Remove lifter. WARNING Failure to lock steering levers and block the road wheels can allow the carrier to move and could result in injury or death. Always lock steering levers and block road wheels before working on the carrier. 4. Block carrier (see your -10). FOLLOW-THROUGH STEPS 1. Adjust track tension (see your -10). 2. Road test carrier to check that road wheel is installed properly (WP 0120 00). END OF TASK 0371 00-3/4 blank 5. TIGHTEN EIGHT LOCKNUTS (4) TO 150-170 LB-FT (203-230 N·M) TORQUE. Use torque wrench.