TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 720 of 1012
TM 9-2350-261-20-2 REPLACE T150 TRACK SHOE ASSEMBLY — Continued 0369 00 INSTALLATION NOTE Position track shoes at a slight angle to mount end connectors on both pins. 1. Install track shoe (1) on track. Have helper assist. a. Install two track pin alignment tools (4) over track shoe pins (5). b. Install four end connectors (2) on track shoe pins (5). Remove track pin alignment tool (4) before driving end connectors flush with pin ends. c. Drive end connectors (2) flush with pin ends and install bolts (3) on each end connector. 2. Join track (see your-10). 3. TIGHTEN FOUR BOLTS (3) TO 400–430 LB-FT (543–583 N·M) TORQUE. Use torque wrench. 0369 00-2 FOLLOW-THROUGH STEPS 1. Adjust track tension (see your -10). 2. Unblock carrier (see your -10). 3. Road test carrier to check that track is installed correctly (see your -10). END OF TASK