TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 679 of 1012
TM 9-2350-261-20-2 REPLACE DIFFERENTIAL TO OIL COOLER HOSE AND FITTINGS 0360 00 THIS WORK PACKAGE COVERS: Removal (page 0360 00-1). Inspection-Acceptance and Rejection Criteria (page 0360 00-2). Installation (page 0360 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) Adjustable Wrench (WP 0780 00, Item 87) M a t e r i a l s / P a r t s Primer N (WP 0782 00, Item 58) Sealing compound (WP 0782 00, Item 60) Suitable container P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 W P 01 20 00 E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) Hull bottom access cover removed (WP 0434 00) Trim vane lowered and power plant front access door open (see your -10) Driver’s power plant access panel removed (WP 0430 00) REMOVAL 1. Drain oil from differential (WP 0120 00). Use suitable container. 2. Disconnect oil hose (1) from elbow (2) at differential. 3. Remove elbow (2) and adapter (3) from elbow (4). 4. If needed, remove elbow (4) from differential. 0360 00-1