TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 672 of 1012
TM 9-2350-261-20-2 REPLACE DIFFERENTIAL OIL PUMP TO DIFFERENTIAL HOSE AND FITTINGS — Continued 0358 00 9. Disconnect hose (2) from tee (16). 10. Remove tee (16) from bushing (17). 11. Remove bushing (17) from differential (18). INSPECTION-ACCEPTANCE AND REJECTION CRITERIA 1. Check fittings, hardware, hoses and pump housing for leaks, cracks, damage and wear. Replace as needed. INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Apply a thin, even coat of sealing compound to cleaned threads of fittings before installation. 2. Install bushing (1) in differential (2). 3. Install tee (3) on bushing (1). 4. Connect differential oil hose (4) to tee (3). 5. Secure hose (4) to hull crossbeam with clamp (5), washer (6), screw (7), and new locknut (8). 6. Install new preformed packing (9), retainer (10), and elbow (11), in differential oil pump (12). Secure with nut (13). 7. Install quick disconnect half (14) and new packing (15) in elbow (11). 8. Install elbow (16) in quick disconnect half (17). 0358 00-2