TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 661 of 1012
TM 9-2350-261-20-2 REPLACE DIFFERENTIAL OIL PUMP — Continued 0354 00 9. TIGHTEN TWO SCREWS (10) TO 35–40 LB-FT (47-54 N·M). Use torque wrench. 10. Secure pump (3) to secondary drive gear with washer (16), nut (17), and new cotter pin (18). NOTE Two washers (16) are the maximum used. If two washers were removed, two will be installed. 11. Install washer(s) (16), to secure pump to drive gear. 12. Connect oil inlet hose (19) to quick disconnect coupling (9). 13. Connect oil outlet hose (20) to elbow (2). 0354 00-5