TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 643 of 1012
TM 9-2350-261-20-2 REPLACE FINAL DRIVE 0350 00 THIS WORK PACKAGE COVERS: INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) Lifting Bar (WP 0780 00, Item 11) Torque Wrench (WP 0780 00, Item 102) Lifting Device M a t e r i a l s / P a r t s Antiseize compound (WP 0782 00, Item 8) Cleaning compound (WP 0782 00, Item 16) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s W P 01 20 00 E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) Power plant front access door opened (see your -10) Right or left drive shaft removed (WP 0348 00 or WP 0349 00) Track cover removed (WP 0365 00) Track removed from drive sprocket (WP 0366 00) Trim vane lowered (see your -10) Track drive sprocket removed from final drive (WP 0382 00) REMOVAL 1. If left final drive is to be removed, remove hull front access cover (WP 0429 00). Remove left final drive speedometer cable and adapter (WP 0248 00). 2. Drain final drive (WP 0120 00). WARNING The final drive is heavy and can cause back injury if handled improperly. Be sure to use a hoist or a helper to remove final drive. 0350 00-1 Removal (page 0350 00-1). Clean, Inspect, and Repair (page 0350 00-3). Installation (page 0350 00-3).