TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 639 of 1012
TM 9-2350-261-20-2 REPLACE LEFT FINAL DRIVE SHAFT — Continued 0348 00 4. Position propeller shaft (6) with universal joints (7) and secure to differential (2) and final drive (5) with eight new screws (8) and washers (9). TIGHTEN SCREWS TO 35–40 LB-FT (47–54 N·M) TORQUE. Use torque wrench and adapter. LOOSEN SCREWS, THEN TIGHTEN AGAIN TO 35–40 LB-FT (47–54 N·M) TORQUE. FOLLOW-THROUGH STEPS 1. Install hull front access cover (WP 0429 00). 2. Close power plant front access door (see your -10). 3. Raise trim vane (see your -10). END OF TASK 0348 00-3/4 blank