TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 598 of 1012
TM 9-2350-261-20-2 REPLACE COMPARTMENT BLOWER (M577A2 AND M1068 ONLY) — Continued 0335 00 INSPECTION-ACCEPTANCE AND REJECTION CRITERIA 1. Check adapter (6). Replace cracked adapter. INSTALLATION 1. Place adapter (6) on blower (7). Secure with three screws (10) and new locknuts (9). 2. Place adapter (6), with blower (7) attached, on flapper valve (8). Secure with six screws (5), washers (4), and new locknuts (3). 3. Connect circuit 59 lead (2) to blower lead (1). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0294 00). 2. Turn MASTER SWITCH to ON (see your -10). 3. Check that blower operates properly ( see y our -10). 4. Turn all switches OFF (see your -10). 5. Install power plant rear access panel (WP 0433 00). END OF TASK 0335 00-2