TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 590 of 1012
TM 9-2350-261-20-2 REPLACE REAR UTILITY OUTLET RECEPTACLES (M577A2 AND M1068 ONLY) — Continued 0332 00 3. Remove clip (7) and rear main wiring harness (8) from cradle (9). 4. Remove screw (10), cradle (9), ground lead (11), and lockwasher (12) from hull weldnut. Discard lockwasher. 5. Remove four screws (13), lockwashers (14), chain (15), receptacle (16), and gasket (17) from rear bulkhead. Discard gasket and lockwashers. 6. Remove cap (18) from receptacle (16). INSPECTION-ACCEPTANCE AND REJECTION CRITERIA 1. Check leads. Replace frayed, cracked, or broken leads (WP 0312 00). 2. Check connectors. Replace cracked or broken connectors (WP 0312 00). INSTALLATION 1. Install cap (1) on receptacle (2). 2. Place new gasket (3) and receptacle (2) on rear bulkhead. Secure with four new lockwashers (4) and screws (5) with chain (6) under head of one screw. 3. Install ground lead (7) and cradle (8) on hull weldnut. Secure with new lockwasher (9) and screw (10). 4. Place rear main wiring harness (11) in cradle (8). Secure with clip (12). 5. Connect receptacle lead (13) to circuit 37A lead (14) (right receptacle) or circuit 37B lead (14) (left receptacle). 6. Install rubber shield (15) on hull mount (16). Secure with retainer strip (17) and two screws (18). 0332 00-2