TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 574 of 1012
TM 9-2350-261-20-2 REPLACE REAR BILGE PUMP PIPES — Continued 0326 00 INSTALLATION 1. Install two clamps (3), hoses (5), and four clamps (4) on pipe (6). 2. Install pipe (6) in carrier and slide hoses (5) onto discharge tube (7) and bilge pump (8). Secure with four clamps (4). 3. Align two clamps (3) with bulkhead weldnuts. Secure with two new lockwashers (2) and screws (1). FOLLOW-THROUGH STEPS 1. Install smoke generator fog oil tank module (M1059 Only) (WP 0695 00). 2. Turn MASTER SWITCH to ON (see your-10). 3. Turn rear B ILGE PU M P SWITCH O N (see your-10). Check pipe for l eaks. 4. Turn BILGE PUMP SWITCH OFF (see your-10). 5. Turn MASTER SWITCH to OFF (see your-10). 6. Install rear floor plate (WP 0436 00). END OF TASK 0326 00-2