TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 570 of 1012
TM 9-2350-261-20-2 REPLACE REAR BILGE PUMP AND STRAINER — Continued 0325 00 INSTALLATION 1. M1064 only, place bracket (2) on new pump (3). Secure with screw (4) and new locknut(5). 2. Install adapter (6) in pump (3). Use adjustable wrench. Place ground lead (7) on pump. Secure with two new lockwashers (8) and screw (9). WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 3. Secure cushion (1) to pump (3) with adhesive. 4. Install pump (3) in carrier. Slide hose (10) on adapter (6) and secure with clamp (11). 5. Place strainer (12) (M1064 only) or strainer (13) (all other carriers) on hull weldnuts. 6. Install bracket (14) on weldnuts. 7. Secure with three new lockwashers (15), ground lead (7), new key washer (16), and two screws (17). 0325 00-4