TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 566 of 1012
TM 9-2350-261-20-2 REPLACE FRONT BILGE VALVE — Continued 0324 00 INSTALLATION 1. Install valve (5) on hull cross beam (4). 2. Secure with three screws (3), six washers (2), and three new locknuts (1). FOLLOW-THROUGH STEPS 1. Check for freedom of movement of valve after installation. 2. Install left front floor plate (WP 0437 00, WP 0438 00, and WP 0441 00). 3. Install personnel heater floor duct (WP 0617 00). 4. Install driver’s rear floor plate (WP 0439 00). 5. Raise and lock ramp (see your -10). 6. Stop/shutdown engine (see your -10). END OF TASK 0324 00-2