TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 561 of 1012
TM 9-2350-261-20-2 REPLACE FRONT BILGE PUMP PIPES 0323 00 THIS WORK PACKAGE COVERS: Removal (page 0323 00-1). Installation (page 0323 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) Torque Wrench (WP 0780 00, Item 106) Socket Wrench (WP 0780 00, Item 95) M a t e r i a l s / P a r t s Gasket Grommet Locknut (4) P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) Trim vane lowered (see your -10) Power plant front access door open (see your -10) Hull front access cover removed (WP 0429 00) Front bilge pump strainer removed (WP 0322 00, Steps 1 - 2) REMOVAL 1. Remove two screws (1), washers (2), and clamps (3) from two bulkhead weldnuts. 2. Loosen four clamps (4). Remove lower pipe (5) from upper pipe (6) and bilge pump. Remove clamp (3), clamps (4), and two hoses (7) from pipe (5). 3. Loosen two clamps (8). Slide pipe (6) from discharge outlet and remove pipe from driver’s compartment. Remove clamp (3), clamps (8), and hose (9) from pipe. 0323 00-1