TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 559 of 1012
TM 9-2350-261-20-2 REPLACE FRONT BILGE PUMP AND STRAINER — Continued 0322 00 1. Remove screw (3) and washer from new pump (6). Discard washer. 2. Install ground lead (5) on pump (6). Secure with two new lockwashers (4) and screw (3). 3. Apply sealing compound to external threads of elbow (2) and adapter (1). 4. Install elbow (2) and adapter (1) on pump (6). Use pipe wrench and adjustable wrench. 5. Cement new cushion (7) on bottom of pump (6) with adhesive. 6. Install pump (6) in carrier. NOTE Do not tighten strap screws until all four are installed. 7. Install strap (8) and ground lead (9) on hull weldnuts. Secure with three new lockwashers (10), screw (11), new key washer (12), and screw (13). Bend tabs on key washer. 8. Install strap (14) on hull weldnuts. Secure with two screws (13) and new key washers (12). Bend tabs on key washers. 9. Slide hose (15) on adapter (16). Secure with clamp (17). 0322 00-3