TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 546 of 1012
TM 9-2350-261-20-2 REPLACE TRANSMISSION HIGH OIL TEMPERATURE SWITCH — Continued 0320 00 INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Coat threads of switch (2) with sealing compound. 2. Install switch (2) in tee (3). TIGHTEN SWITCH TO 240–264 LB-IN (27–34 N·M) TORQUE. Use torque wrench. 3. Connect circuit 327 lead (1) to switch (2). FOLLOW-THROUGH STEPS WARNING Loose clothing is dangerous around moving belts and pulleys. You could get badly hurt if your clothes get caught in moving parts. 1. Start engine to check for oil leaks at transmission high oil temperature switch. Stop/shutdown engine (see your -10). 2. Close power plant front access door and raise trim vane (see your -10). END OF TASK 0320 00-2