Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 542 of 1012

TM 9-2350-261-20-2 REPLACE DIFFERENTIAL HIGH OIL TEMPERATURE SWITCH — Continued 0318 00 INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Coat threads of switch (2) with sealing compound. 2. Install switch (2) in tee (3). Tighten switch. 3. Connect circuit 328 lead (1) to switch (2). FOLLOW-THROUGH STEPS 1. Refill differential (WP 0120 00). 2. Start engine (see your -10). Check for oil leaks at differential high oil temperature switch. 3. Stop/shutdown engine (see your -10). 4. Close power plant front access door and raise trim vane (see your -10). END OF TASK 0318 00-2