TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 540 of 1012
TM 9-2350-261-20-2 REPLACE ENGINE COOLANT TEMPERATURE SWITCH — Continued 0317 00 INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Coat threads of switch (2) with sealing compound. 2. Install switch (2) in thermostat housing (3). 3. Connect circuit 33 lead (1) to switch (2). FOLLOW-THROUGH STEPS 1. Refill cooling system (WP 0194 00). 2. Start engine (see your -10). Check for coolant leaks at engine coolant temperature switch (WP 0050 00). 3. Stop/shutdown engine (see your -10). 4. Close power plant front access door and raise trim vane (see your -10). END OF TASK 0317 00-2