TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 527 of 1012
TM 9-2350-261-20-2 REPAIR WIRING HARNESS — Continued 0312 00 b. If insulated sleeving (12) was removed from lead (13), slide new insulated sleeving on lead. Strip insulation from lead to same length as crimp (14) on terminal (15). c. If large diameter lead (1), fill crimp (2) on terminal (3) with solder. Use soldering gun. Insert lead into melted solder in crimp. Allow to cool. d. If lead (11) is small diameter, position terminal (13) on lead. Crimp terminal on lead. e. Heat shrink insulated sleeving (1) on terminal (2) and leads. 4 . In stall m ultiple co nnect ors th e sam e way as single co nnectors. See ASSEMBLY Steps 1 - 2. 0312 00-5