TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 524 of 1012
TM 9-2350-261-20-2 REPAIR WIRING HARNESS — Continued 0312 00 2. Remove female connector from harness lead. a. Slide shell (6) back on lead (7). b. Slide sleeve (8) back from contact socket (9). c. Clip socket (9) from lead (7). Discard socket. d. Remove sleeve (8) and shell (6) from lead (7). 3. Remove terminal connector from harness lead. a. If lead (1) has nipple (2), slide nipple back on lead. b. If lead (1) has insulated sleeving (3), cut and discard sleeving from lead. c. If lead (1) is of large diameter, place in vise (4). Cut lead with hacksaw as close as possible to terminal (5). Discard terminal. d. If lead (1) is of small diameter, cut lead as close as possible to terminal (5). Discard terminal. 0312 00-2