TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 507 of 1012
TM 9-2350-261-20-2 REPLACE BATTERY DRAWER INSULATION AND HEAT EXCHANGER (M1064 ONLY) — Continued 0308 00 5. Install battery drawer (WP 0306 00). 6. Place two clamps (10) on two elbows (12). Install two hoses (13) on two elbows (12) and heat exchanger (11). Secure with four clamps. 7. Place two brackets (14) on battery drawer (3). Secure with four screws (15), washers (1), and nuts (2). FOLLOW-THROUGH STEPS 1. Install batteries (WP 0303 00). 2. Fill carrier cooling system (WP 0194 00). 3. Fill coolant heater system (WP 0639 00). 4. Start coolant heater (see your -10). Check heat exchanger for leaks. Turn heater off. 5. Raise and lock ramp (see your -10). 6. Stop/shutdown engine (see your -10). END OF TASK 0308 00-5/6 blank