TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 506 of 1012
TM 9-2350-261-20-2 REPLACE BATTERY DRAWER INSULATION AND HEAT EXCHANGER (M1064 ONLY) — Continued 0308 00 INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Apply adhesive on insulation sheets. Wait 10-20 seconds until adhesive becomes tacky. 2. If removed, install two insulation strips (2) and two insulation sheets (1) on battery drawer (3). 3. If removed, install left insulation sheet (4), right insulation sheet (5), rear insulation sheet (6), bottom insulation sheet (7), and top insulation sheet (8) in battery drawer shield (9). 4. Place two clamps (10) on heat exchanger (11). Install heat exchanger in battery drawer (3). 0308 00-4