TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 503 of 1012
TM 9-2350-261-20-2 REPLACE BATTERY DRAWER INSULATION AND HEAT EXCHANGER (M1064 ONLY) 0308 00 THIS WORK PACKAGE COVERS: Removal (page 0308 00-1). Clean, Inspect, and Repair (page 0308 00-3). Installation (page 0308 00-4). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s Sealing compound (WP 0782 00, Item 66) Sodium bicarbonate (WP 0782 00, Item 70) P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Batteries removed (WP 0303 00) Carrier cooling system drained (WP 0193 00) Coolant heater system drained (WP 0639 00) REMOVAL 1. Remove four nuts (1), washers (2), screws (3), and two brackets (4) from battery drawer (5). 2. Loosen four clamps (6). Remove two hoses (7) from heat exchanger (8) and two elbows (9). Remove clamps from hoses. 0308 00-1