Sign up to sell your inventory with NSN Lookup

TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 480 of 1012

TM 9-2350-261-20-2 REPLACE BATTERIES AND RETAINERS (ALL EXCEPT M1064) — Continued 0302 00 C A U T I O N Place batteries with positive (+) and negative (-) terminals as shown in diagram below. Damage to components will occur if batteries are hooked up wrong. 1. Place batteries (1) in battery box (2). 2. Install two bolts (3) in slots of battery frame (4). Turn bolts to secure. 3. Install two retainers (5) on two bolts (3). Secure with two washers (6) and nuts (7). 4. Place clamp (8) on two retainers (5). Secure with washer (9) and bolt (10). FOLLOW-THROUGH STEPS 1. Install battery terminal lugs (WP 0300 00). 2. Connect battery ground lead (WP 0294 00). 3. Turn MASTER SWITCH to ON to check that batteries are installed correctly. Master switch on light should come on (see your -10). 4. Raise and lock ramp (see your -10). 5. Stop/shutdown engine (see your -10). END OF TASK 0302 00-4