TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 467 of 1012
TM 9-2350-261-20-2 REMOVE/INSTALL BATTERY LEADS (M577A2 ONLY) — Continued 0299 00 INSTALLATION C A U T I O N Battery cells can be damaged if the battery is hooked up incorrectly. Make sure battery is hooked up correctly. 1. Install circuit 6 lead (1) and circuit 48B lead (2) as follows: a. Install terminal lug (5) on positive (+) battery post. Secure with screw (8) and nut (7). b. Install two new grommets (6) in battery box. Route circuit 6 lead (1) and 48B (2) through grommets into battery box. c. Install screw (4), circuit 48B lead (2), and circuit 6 lead (1) on terminal lug (5) and secure with nut (3). 2. Place terminal lug (1) on battery post. Secure with screw (2) and nut (3). 3. Place jumper lead (4) on two screws (5) of two terminal lugs (1). Secure with two nuts (6). 4. Install circuit 7 lead (7) as follows: a. Place lead (7) on hull mount. Secure with two washers (8), screw (9), and nut (10). b. Install new grommet (11) in battery box (12). Route lead (7) through grommet into battery box. c. Place lead (7) on screw (5) of terminal adapter (1) and secure with nut (6). 5. Coat tops of four battery terminal lugs with grease. 0299 00-3