TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 462 of 1012
TM 9-2350-261-20-2 REMOVE/INSTALL BATTERY LEADS (M1068 ONLY) — Continued 0298 00 INSTALLATION C A U T I O N Battery cells can be damaged if battery is hooked up incorrectly. Make sure battery is hooked up correctly. 1. Install four battery terminals (1) and (2) in battery box (3). Secure with four screws (4) and nuts (5). 2. Install circuit lead (6), circuit lead (7), circuit lead (8), and circuit lead (9) as follows: a. Install two new grommets (10) and (11) in battery box (3). b. Route circuit 6 lead (6), circuit 31 lead (7), and circuit 7 lead (8) through three-hole grommet (10) into battery box (3). c. Route circuit 48B lead (9) through grommet (11) into battery box (3). d. Install circuit 48B lead (9), circuit 31 lead (7), and circuit 6 lead (6) on battery positive terminal (1). Secure with screw (12) and nut (13). e. Install circuit 7 lead (8) on battery negative terminal (2). Secure with screw (12) and nut (13). f. Install circuit 7 lead (8) on hull mount. Secure with two washers (14), screw (15), and nut (16). 0298 00-4