TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 452 of 1012
REPLACE BATTERY COVER AND GROUND LEAD (M113A2, M901A1, AND M1059) — Continued INSTALLATION C A U T I O N Battery cells can be damaged if the batteries are hooked up incorrectly. Make sure batteries are hooked up correctly. 1. Place two terminal lugs (4) on battery posts. Secure with two screws (6) and nuts (5). 2. Place jumper lead (2) on two screws (3) of two terminal lugs (4). Secure with two nuts (1). NOTE Install circuits 6 and 48 positive leads before installing circuit 7 ground lead. 3. Install circuit 7 lead (7) as follows: a. Place lead (7) on hull mount. Secure with two washers (8), screw (9), and nut (10). b. Install new grommet (11) in battery box (12). Route circuit lead 7 (7) through grommet into battery box. c. Place circuit 7 lead (7) on screw (3) in terminal lug (4) of battery closest to the ramp door. Secure with nut (1). 0295 00-4 0295 00 TM 9-2350-261-20-2