TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 443 of 1012
TM 9-2350-261-20-2 REPLACE SOLID STATE INFRARED POWER SUPPLY — Continued 0293 00 INSTALLATION 1. Place power supply (2) on four weldnuts. Secure with four screws (3) and eight lockwashers (4) on weldnuts. 2. Connect circuit 517 lead (5) and circuit 516A lead (6) to power supply (2). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0294 00). 2. Turn MASTER SWITCH to ON (see your -10). 3. Install and operate M19 periscope to check that infrared power supply is operable (see your -10). 4. Turn all infrared periscope switches off (see your -10). 5. Turn MASTER SWITCH to OFF (see your -10). 6. Stow periscope (see your -10). END OF TASK 0293 00-3/4 blank