TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 428 of 1012
REPLACE REAR MAIN WIRING HARNESS (M113A2, M901A1, AND M1059 ONLY ) — Continued 36. If engine coolant heater is installed, connect circuit 402A lead (13) to engine coolant heater fuel pump (14). 37. If personnel heater is installed, connect circuit 402 lead (15) to personnel heater fuel pump (16). 38. Install circuit 451 lead (17) on two cradles (18). Secure with two cradle clips (19). 39. Install circuit 451 lead (17) on weldnut (20). Secure with screw (21), new lockwasher (22), and clamp (23). 40. Install clamp (24) on circuit 451 lead (17). Secure with screw (25) and nut (26). 41. Install clamp (24) on floor transverse beam (27). Secure with two screws (28) and nuts (29). 42. Install wiring harness (30) and bilge tube clamp (31) on weldnut (32). Secure with screw (33) and clamp (34). 0289 00-18 0289 00 TM 9-2350-261-20-2