TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 420 of 1012
REPLACE REAR MAIN WIRING HARNESS (M113A2, M901A1, AND M1059 ONLY ) — Continued 44. Remove two nuts (1), mounts (2) and (3), flat washers (4), and screws (5) that secure instrument panel (6) to two struts (7). 45. Support panel (6). Remove two screws (8), flat washers (9), one lockwasher (10), and ground lead (11) from two mounts (12) and upper support (13). Discard lockwasher. 46. Support panel (6) on two struts (7) to gain access to rear of panel. 47. Disconnect circuit 28 lead (14) from fuel gauge. 48. Disconnect circuit 451B lead (15) from rear BILGE PUMP ON indicator light. 49. Disconnect circuit 38 lead (16) from instrument panel wiring harness. 50. Disconnect circuit 450 lead (17), 450B lead (18), and 451A lead (19) from BILGE PUMP SWITCH. 51. Disconnect circuit 21 lead (20), circuit 22 lead (21), circuit 23 lead (22), and circuit 24 lead (23) from front main wiring harness. 52. Remove rear main wiring harness from carrier (all carriers with inside fuel tanks). 0289 00-10 0289 00 TM 9-2350-261-20-2