TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 396 of 1012
TM 9-2350-261-20-2 REPLACE REAR MAIN WIRING HARNESS (M1064 ONLY) — Continued 0288 00 41. If personnel heater is installed, disconnect circuit 400 lead (1) from heater control box lead. 42. If engine coolant heater is installed, disconnect circuit 400A lead (2) from engine coolant heater control box lead. 43. Remove clip (3) and harness (4) from cradle (5). 44. Remove two locknuts (6), mounts (7) and (8), washers (9), and screws (10) that secure instrument panel (11) to two struts (12). Discard locknuts. 45. Support panel (11). Remove two screws (13), one internal tooth lockwasher (14), and ground lead (15) from two panel mounts (16) and bracket (17). Discard lockwasher. 46. Lower panel (11) and support on two struts (12) to gain access to rear of instrument panel. 0288 00-10