TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 389 of 1012
TM 9-2350-261-20-2 REPLACE REAR MAIN WIRING HARNESS (M1064 ONLY) — Continued 0288 00 6. Remove nut (1), washer (2), and rubber bushing (3) around harness (4) from connector (5). 7. Remove connector (5) from hull. 8. Pull harness (4) through hole in hull top. Leave connector (5), rubber bushing (3), washer (2), and nut (1) on harness. 9. Remove screw (6), locknut (7), clamp (8), and harness (4) from upper bilge tube clamp (9). Discard locknut. 10. Remove two screws (10), lockwashers (11), clamps (12), and harness (4) from two lower bilge tube clamps (13). Discard lockwashers. 0288 00-3