Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 385 of 1012

TM 9-2350-261-20-2 REPLACE REAR MAIN WIRING HARNESS (M577A2 AND M1068 ONLY) — Continued 0287 00 82. Install two new lockwashers (7), ground lead (8), three clamps (9), and circuit 29 lead (10) on three weldnuts (11). Secure with three screws (12) and flat washers (13). 83. Install new lockwire (14), one screw (15), new lockwasher (16), and ground lead (8) on right fuel quantity sending unit (17). 84. Connect circuit 29 lead (10) on right fuel quantity sending unit (17). FOLLOW-THROUGH STEPS 1. Install rear floor plate (WP 0436 00). 2. Connect battery ground lead (WP 0294 00). 3. Install FAX. See TM 11-7010-256-12&P. 4. Install battery access cover (see your -10). 5. Turn MASTER SWITCH to ON (see your -10). Check that electrical system works properly. 6. Start engine (see your -10). 7. Raise and lock ramp (see your -10). 8. Stop/shutdown engine (see your -10). END OF TASK 0287 00-31/32 blank