TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 351 of 1012
TM 9-2350-261-20-2 REPLACE RIGHT HEADLIGHT WIRING HARNESS — Continued 0286 00 9. Remove three cradle clips (15) and harness (16) from three cradles (17). 10. Remove two screws (18), two clamps (19), and harness (16) from weldnut (20). INSPECT AND REPAIR 1. Check leads for continuity. Replace bad leads. 2. Check harness for damage. Repair damaged terminals (WP 0312 00). 3. Check for damaged connectors. If connectors are damaged, turn in to direct support maintenance. INSTALLATION NOTE New harness assembly comes with hull bushing assemblies installed. 1. Connect right headlight wiring harness (1) to front main wiring harness at driver’s compartment bulkhead. 0286 00-3