TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 239 of 1012
TM 9-2350-261-20-2 REPLACE WARNING PANEL LIGHTS 0251 00 THIS WORK PACKAGE COVERS: Removal (page 0251 00-1). Clean, Inspect, and Repair (page 0251 00-2). Installation (page 0251 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s Light bulbs, as needed Lockwasher (2) P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) REMOVAL NOTE There are four lights on warning panel. Remove all lights the same way. 1. Remove light bulb (1). a. Turn lens (2) counterclockwise. Remove lens and gasket (3) from light assembly (4). b. Push in and turn light bulb (1) counterclockwise and remove bulb from light assembly (4). NOTE Do not disconnect more than one light at a time. Mark each lead to make sure you reconnect to correct contacts. See wiring diagrams at the end of this manual. 2. Remove light assembly (4). a. Disconnect circuit lead (5) from light assembly (4). b. Remove two screws (6), lockwashers (7), and light assembly (4) from warning lights panel. Discard lockwashers. 0251 00-1