Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 232 of 1012

TM 9-2350-261-20-2 REPLACE SPEEDOMETER CABLE AND ADAPTER — Continued 0248 00 4. Remove grommet (6) and gasket (10) from cable (15). Discard grommet and gasket. 5. Straighten four key washers (4). Remove four screws (5), key washers (4), and final drive adapter (2) from final drive. Discard key washers. 6. Remove preformed packing (1) from adapter (2). Discard packing. INSTALLATION 1. Place new preformed packing (1) on new final drive adapter (2). 2. Grease speedometer shaft (3) (WP 0120 00). 3. Place adapter (2) on final drive, and secure with four new key washers (4) and screws (5). Bend keys on washers. NOTE Remove clamps and install new cable. 4. Install new grommet (6) on new cable (7) and route cable through driver’s compartment bulkhead. 5. Install grommet (6) in bulkhead. 6. Install slotted washer (8) and flat washer (9) on speedometer cable (7) and final drive adapter (2). 7. Install speedometer cable (15) with new gasket (10) on speedometer (11). 0248 00-2