TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 23 of 1012
TM 9-2350-261-20-2 FILL COOLING SYSTEM — Continued 0194 00 WARNING Hot radiator coolant can burn you. Remove cap only if cool to touch. Drain cocks may be hot. Turn cap slowly to release pressure. Replace cap by pressing down and turning until tight. 8. Add coolant as necessary to within 1/2 inch (13 mm) of bottom of filler neck. 9. Using antifreeze and battery tester, check coolant for level of protection required for climate. FOLLOW-THROUGH STEPS 1. Install power plant rear access panel (WP 0431 00, WP 0432 00, or WP 0433 00). 2. Install driver’s power plant access panel (WP 0430 00). 3. Close power plant front access door and raise trim vane (see your -10). END OF TASK 0194 00-3/4 blank