TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 221 of 1012
TM 9-2350-261-20-2 REPLACE INSTRUMENT PANEL GAUGES 0244 00 THIS WORK PACKAGE COVERS: Removal (page 0244 00-1). Installation (page 0244 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s Lockwasher (2) P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) Battery ground lead disconnected (WP 0294 00) Instrument panel removed (WP 0238 00) REMOVAL NOTE There are three gauges on the instrument panel. Except for the number of leads, remove all gauges the same way. Do not disconnect more than one gauge at a time. Mark each lead to make sure you reconnect to correct contacts. See wiring diagrams at the end of this manual. 1. Disconnect circuit leads (1) from rear of gauge (2). 2. Remove two nuts (3), lockwashers (4), and bracket (5) from rear of gauge (2). Discard lockwashers. 3. Remove gauge (2) from front of instrument panel. 0244 00-1