TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 220 of 1012
TM 9-2350-261-20-2 REPLACE ENGINE START SWITCH — Continued 0243 00 INSTALLATION 1. Connect circuit 14/74 connector (5) to rear of start switch (2). 2. Install nut (4) and new lockwasher (3) on start switch (2). 3. Install start switch (2) through rear of instrument panel. Secure with two nuts (1) and (4). FOLLOW-THROUGH STEPS 1. Install instrument panel (WP 0238 00). 2. Connect battery ground lead (WP 0294 00). 3. Turn MASTER SWITCH to ON (see your -10). 4. Crank engine to check for proper installation of starter switch (see your -10). 5. Turn MASTER SWITCH to OFF (see your -10). END OF TASK 0243 00-2