TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 21 of 1012
TM 9-2350-261-20-2 FILL COOLING SYSTEM 0194 00 THIS WORK PACKAGE COVERS: Servicing (page 0194 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s Antifreeze and Battery Tester (WP 0780 00, Item 77) General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s Antifreeze (WP 0782 00, Item 7) Container (14 gallon) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) Driver’s power plant access panel removed (WP 0430 00) Power plant rear access panel removed (WP 0431 00, WP 0432 00, or WP 0433 00) SERVICING NOTE When filling the radiator, add coolant slowly to allow trapped air to escape. NOTE Use antifreeze coolant in system at all times. It will reduce corrosion in engine block and cooling system parts. Ethylene glycol coolant will provide low temperature protection. Mix coolant and clean water based on protection label on container. 1. Make sure all six drain cocks (1), (2), (3), and (4) are closed and all tubes, hoses and connections are tight. 0194 00-1