TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 198 of 1012
TM 9-2350-261-20-2 REPLACE STARTER — Continued 0236 00 4. Install two new lockwashers (7) (Delco and Leece Neville only) and circuit 75A lead (8) on terminal of starter solenoid. Secure with nut (9) (screw on Prestolite). 5. Install new lockwasher (10) and circuit 6 lead (11) on terminal of solenoid (4). Secure with nut (12). 6. Install new lockwasher (13) and two ground leads (14) on terminal of starter (3). Secure with nut (15). 7. Install exhaust pipe (WP 0189 00). 8. Close power plant front access door (see your -10). 9. Raise trim vane (see your -10). FOLLOW-THROUGH STEPS 1. Install power plant (WP 0131 00), if removed. 2. Connect battery ground lead (WP 0294 00). 3. Start engine. Check that starter is operable (see your -10). 4. Stop/shutdown engine (see your -10). END OF TASK 0236 00-6