Sign up to sell your inventory with NSN Lookup

TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 194 of 1012

REPLACE STARTER — Continued 3. Remove nut (9) (screw on Prestolite), two lockwashers (10) (Delco and Leece Neville only), and circuit 74A lead (11) from terminal on solenoid. Discard lockwashers. WARNING Avoid injury. Get an assistant to help you lift the starter or use a hoist. Starter weighs about 75 pounds (34 kg). 4. Remove three bolts (1), lockwashers (2), starter (3) with solenoid (4), and gasket (5) (if installed) from engine (6). Discard lockwashers. CLEANING 1. Check starter drive teeth. Remove burrs. Replace starter that has damaged teeth or teeth worn beyond original shape. INSTALLATION NOTE Check that starter-to-engine housing gasket is in place. Gasket is necessary to keep water out of starter. 0236 00-2 0236 00 TM 9-2350-261-20-2